KIA VX750M

Results 1 to 3 of 3

Thread: KIA VX750M

  1. #1
    Registered
    Join Date
    Sep 2016
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default KIA VX750M

    We have a kia vx750m and are getting an alarm code #2063 which says arm not up, this is happening during a program run and has also done it during manual tool changes, the tool change arm stops at the tool head,
    any ideas ? I'm new to the maint. dept. so any help would be appreciated

    Last edited by CAV; 09-08-2016 at 04:40 PM.


  2. #2
    Registered
    Join Date
    Sep 2016
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: KIA VX750M

    I should have also mentioned this is happening when the arm is up at the spindle during the tool change



  3. #3
    Member
    Join Date
    Jan 2013
    Location
    germany
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: KIA VX750M

    there should be 4 Limit switches (Sensors) infront of the cam box.
    i guess left one is for the brake and the 3rd one is homeposition.
    maybe the 3rd one is broken or the signal wheel is moved?!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

KIA VX750M

KIA VX750M