Skt300 tapping help

Results 1 to 2 of 2

Thread: Skt300 tapping help

  1. #1
    Registered
    Join Date
    Jun 2014
    Posts
    11
    Downloads
    0
    Uploads
    0

    Default Skt300 tapping help

    We purchased a Hyundai kia skt300 lathe but can not get the g84 cycle to work. Can someone with a Hyundai kia machine please post there g code with a g84 cycle so we can see what's been done wrong. Sorry I can't post ours I don't have access to it currently.

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2013
    Location
    germany
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Skt300 tapping help

    did you find it out?

    you need to command depending on which spindle
    M3 Sxxx
    M122 (main spindle rigid tap mode (maybe on the SKT300 not needed))
    M129 Sxxx (rigid tap mode)
    G84xxx
    G80
    M128 (rigidtap mode cancel)
    M123 (cancel main spindle

    or

    M122 (main spindle rigid tap mode (maybe on the SKT300 not needed))
    M3 Sxxx
    M129 Sxxx (rigid tap mode)
    G84xxx
    G80
    G128 (rigidtap mode cancel)
    M123 (mainspindle rigid tap mode cancel)



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Skt300 tapping help

Skt300 tapping help