Need Help! Hyundai Hit-20m turret problem!

Results 1 to 2 of 2

Thread: Hyundai Hit-20m turret problem!

  1. #1
    Member Winamp9's Avatar
    Join Date
    Jul 2023
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Hyundai Hit-20m turret problem!

    I am working on a Hyundai that has a duplomatic bsa 200 turret and when the program was finished I took the turret away to turn the turret and it stopped halfway as if it had not locked. I can turn the revolver by hand, but it won't lock and can't be turned using the turn button. I got errors: -Turret motor overload -Turret not clamped -Turret thermal alarm from turret unit thanks in advance

    Similar Threads:


  2. #2
    Member
    Join Date
    Sep 2009
    Location
    USA
    Posts
    103
    Downloads
    0
    Uploads
    0

    Default Re: Hyundai Hit-20m turret problem!

    I just saw this post so maybe you figured it out. Your turret did not clamp and you'll need to manually clamp it our use the procedure in the Duplomatic manual. The thermal overload alarm is bogus and will send you down the wrong street.
    You can contact Macoser Inc in North Carolina to get manuals for that turret. ( I may have a PDF) The BSA 200 turrets seem to last about 4 years before they need to be rebuilt.
    I have three of these lathese so I have learned to do it in house.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hyundai Hit-20m turret problem!

Hyundai Hit-20m turret problem!