job openings with OPEN MIND

[Alan L]

Current openings in Los Angeles and Boston.

Details on the web site www.openmind-tech.com.

[Alan L]

Just to clarify, the current openings are Application Engineers.

The new hires will join a strong team that is located across the country. The job functions include pre-sales demos, support of customers, dealers, and partners; training, and trade shows.

Travel expectation is 25-50%.

[Alan L]

A new open AE position exists in Los Angeles / Orange County.

Please check www.openmind-tech.com for more details.

[Alan L]

We have a job opening for a regional account manager / sales manager based in southern California for the western states. More information is available at.

http://www.openmind-tech.com/en/open...t_manager_usa/

Please send your credentials to alan.levine@openmind-tech.com.

Principals only.

[thebowman]

Originally Posted by Alan L We have a job opening for a regional account manager / sales manager based in southern California for the western states. More information is available at. http://www.openmind-tech.com/en/open...t_manager_usa/ Please send your credentials to alan.levine@openmind-tech.com. Principals only.

Alan,

With better training tutorials Hypermill might just sell itself in Southern California because the VAR's from other CAM systems are really hurting or gone all together.

This guy (Kevin Cunningham) produced some of the best training material I've ever seen for Surfcam:

http://www.performancecadcam.com/

You've got one of the leading shops in San Diego to switch from Mastercam to Hypermill because they felt very strongly that Mastercam couldn't do the job for them. You want the rest of the market to fall in line you're going to need much better training material so potential new users can discover the power of Hypermill for themselves. This is just as important or maybe more important than new sales people.

[single phase]

Originally Posted by thebowman Alan, With better training tutorials Hypermill might just sell itself in Southern California because the VAR's from other CAM systems are really hurting or gone all together. This guy (Kevin Cunningham) produced some of the best training material I've ever seen for Surfcam: http://www.performancecadcam.com/ You've got one of the leading shops in San Diego to switch from Mastercam to Hypermill because they felt very strongly that Mastercam couldn't do the job for them. You want the rest of the market to fall in line you're going to need much better training material so potential new users can discover the power of Hypermill for themselves. This is just as important or maybe more important than new sales people.

+1

[DIFF OVER]

i would do anything to get a chance to be an AE for OM in the Mn area!!

[Alan L]

Two positions posted at:

OPEN MIND - Careers at the CAM Company

Locations: Detroit/Livonia - Los Angeles - Boston

[Alan L]

Sales / Account Manager sought for Quebec region. Candidate must be fluent in French and English.

Send credentials to alan.levine@openmind-tech.com.