- Omag press brake hydraulic problem
-
Member
Omag press brake hydraulic problem
Hi all,
I have a hydraulic cnc press brake it has problems when going to slow speed just before reaching the die. It succeeds to finish the bend 20% of the time and the rest it stops and fails to do the slow speed and returns up again. Please find attached the hydraulic circuit. I need professional help to explain the oil flow path in each case to help us diagnose the problem.
Similar Threads:
-
- Omag press brake hydraulic problem
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules