Does anyone have a quick way to identify the Hurco models?

[Jackal66]

Hello,
I am new to the Hurco line of mills. While trying to learn more, it seems that most look similar, b'port style head vs. rigid head, and bed mill vs. knee mill.

Is there a quick way to identify these?

I see KMB-1, KMB-1M, and the Hawk series is confusing ,too.

Plus some of them have dual monitor screens.

If some one has a quick explanation or a link I can go to let me know.

My next purchase will be a Hurco cnc ,and hopefully soon.

Jackal66

[Advena_SA]

Hurco.com

[Jackal66]

Hurco.com, only shows newer models. The ones I am talking about are from 10 to 25 years old.

JAckal

[gthlm]

If you have the serial number, this is what you are looking for.

[Jackal66]

gthlm,,
Thanks a million+. That is exactly what I was looking for. Some of them on Ebay will have the serial # and call it something else.


Thanks again,
JAckal66

[Rich Carlstedt]

For whats its worth
Whats missing are some of the definitions.

a P = tool changer for example

[Jackal66]

Thanks Rich,

I was looking at a KMB-1 and it has an "A" at the end of the serial #, any thoughts on what that describes?


JAckal66

[Rick Kight]

According tot he pdf file above and "A" at the end is the revision

Rick

[Jackal66]

Would that mean it has been modified by Hurco? New board, different operating system, or had newer features than others of the same year model?

Thanks for helping me,


JAckal66