| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| HURCO Discuss Hurco machines here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-24-2008, 04:20 PM
| ||||
| ||||
KMB1 control with a program for z axis move work great and then send the Z up to the limit switch. Any leads?  |
|
#3
06-26-2008, 09:01 AM
| ||||
| ||||
| Using the control just for a peck cycle it starts to loose Z position and then it hit its limit switch after about 5 pecks. I wonder if its the motor coupler. |
|
#4
06-26-2008, 09:20 AM
| |||
| |||
| Is this a stepper motor cnc? if so, thats your problem. Your overworking the steppers and losing posistion, or your accel and decel is set to fast, also losing posistion. If this is a closed loop system, for any tool change, or when the program ends with a "M2" or a "M30", that will send the z axis up to the home posistion. a "M25" code in the program will also send the z axis up to home. |
|
#5
06-26-2008, 09:28 AM
| ||||
| ||||
| This is a servo system and the machine has no tool changer |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY Z axis 0 plate. It works perfect! | balsaman | DIY-CNC Router Table Machines | 64 | 02-20-2010 10:52 PM |
| B-axis limit on Fadal | 5th-axis | Fadal | 1 | 12-06-2007 04:25 PM |
| extreme axis limit | bghowland | Bridgeport and Hardinge Mills | 5 | 09-18-2006 07:05 PM |
| Newbie Home switch and Limit, how it works ? | Calico | General Metal Working Machines | 8 | 10-05-2005 03:53 PM |
| Upgraded to 4.0, now only X axis works?? | Mueller | TurboCNC | 1 | 10-04-2005 10:23 AM |
| | |
Linear Mode
