| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| HURCO Discuss Hurco machines here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-17-2008, 03:35 PM
| ||||
| ||||
Its a older HBM-1 control and everytime we try a program the Y axis moves out to its limit without any Y move programmed....what the heck? Anyone have a good direction I can try?  |
|
#2
06-22-2008, 12:51 PM
| |||
| |||
| If its creeping then I'd say it was a gain adjustment on the servo amp . If the machine just takes off then you have an open connection between the servo encoder and the amp/cpu rack |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Trade offs between Moving Gantry and Moving Table | gregmary | DIY-CNC Router Table Machines | 11 | 04-22-2011 01:48 PM |
| Problem- Mach3 y axis dc servo jumps when moving small increments only. | mif73 | Mach Software (ArtSoft software) | 5 | 09-15-2008 03:32 AM |
| Moving Table vs Moving Gantry; Dremel vs Router | chuckknigh | DIY-CNC Router Table Machines | 32 | 03-27-2007 08:48 PM |
| Axis are not moving | Reef Guy | Mach Software (ArtSoft software) | 4 | 09-13-2006 08:42 PM |
| Need PIC programmed | randyf1965 | CNC Wood Router Project Log | 0 | 03-26-2005 05:56 PM |
| | |
Linear Mode
