SM-1 Servo motor specs

[tjs88yj]

Can anyone tell me the specs for my SM-1 servo motors? I need to know these things...

1. Stall Torque
2. Operating or Maximum Voltage.
3. Operating or Maximum Current.

Any help would be greatly appreciated.

Tom

[jetski]

I would call Hurco U.S. at 1-800-634-2416 and talk to the service guys. Steve Artz, Brock Rexing, or Don Schmedkey. A great group of guys.

[tjs88yj]

Thanks for the reply jetski. I emailed Hurco tech support, they replied that the information that I was wanting was no longer available. I guess I'll try the more personal approach and call. Thanks again.

Tom

[Al_The_Man]

In a pinch you can find out by a few simple tests, I have posted a couple of methods here before.
Al.

[tjs88yj]

Originally Posted by Al_The_Man In a pinch you can find out by a few simple tests, I have posted a couple of methods here before. Al.

Al, Are you able to do these test with a non functioning machine? I just bought this mill and there are a couple of boards missing out of the control electronics cabinet.

Thanks

tom

[Al_The_Man]

Yes, if DC brushed motors, you can do a set up on a bench.
If may be able to find the link if you do not come across it.
Al.

[tjs88yj]

Al,
If you can find it that would be great. I've searched some and haven't found it. Thanks

Tom