| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| HURCO Discuss Hurco machines here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-06-2007, 08:48 PM
| |||
| |||
| Setting tools on my KMB-1 I would like to know what is the best way to set tool hieght on my KMB-1. I am going to run a G-Code program and I dont have a pre-setter. I was thinking that its like the accurites, touch tool off then tool cal. then touch it off again when it askes for tool lenght. I am way off Iknow but if you guys got any hins that would be great...    |
|
#2
12-07-2007, 09:36 AM
| |||
| |||
| mmaching Your on the right track, set your tool up in the controller ie tool #, dia etc. load tool-touch off and with the cursor on tool length press the tool length cal button. This is comming from memory but that is basicly it, you only have to touch off once. |
|
#3
12-07-2007, 04:27 PM
| |||
| |||
| Thanks. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Bring your own tools or does your company supply tools? | ZipSnipe | CNCzone Club House | 10 | 02-04-2011 08:06 PM |
| Setting up EMC | rmacster | LinuxCNC (formerly EMC2) | 5 | 10-17-2007 09:47 AM |
| Setting Up Custom tools in X lathe | Davidimurray | Mastercam | 1 | 01-31-2007 05:54 AM |
| Setting tools | Drew | CamSoft Products | 2 | 11-25-2006 11:45 AM |
| Setting z | bbergami | G-Code Programing | 4 | 10-01-2006 09:21 AM |
| | |
Linear Mode
