| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| HURCO Discuss Hurco machines here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-13-2007, 01:49 PM
| |||
| |||
| Hurco VM1 Spindle Load Monitor Hello, I have a Hurco VM1 machine that is brand new. The spindle load mnoitor never shows anything when running a program, but when starting up the machine it will flash on so I know what it should look like. Does yours work while the program is running? This is a tech school so not a whole lot of knowledge about this machine or CNC machining here. I have taken up to a .045 cut at 3000 RPM on MS with a carbide 5/16 4fl end mill with nothing showing up.    |
|
#2
11-22-2007, 01:15 PM
| |||
| |||
| Doesn't sound like enough of a cut to put a load on it. That's just a scratch. It could also be the colors selected in system configuration. Depending how they are set up, it won't show up until there is a high load.(70-100%) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| servo and spindle drive regen load resistors | daleman | Haas Mills | 27 | 12-04-2007 12:28 PM |
| Spindle accel/decel load | fpworks | Fadal | 2 | 10-30-2006 10:09 AM |
| TAIG spindle speeds and a load meter question | Smertrios | Taig Mills & Lathes | 2 | 04-26-2006 05:34 PM |
| Spindle, Hurco | ozzie34231 | General Metal Working Machines | 4 | 03-17-2006 08:20 PM |
| Spindle load meter ? | Ken_Shea | Haas Mills | 1 | 10-10-2004 11:21 PM |
| | |
Linear Mode
