Problems with PC communicating with Hurco

[FatFarmBoy]

Help!!!!
My wife, God Bless her! Dumped my PC that I used to program with in Smartcam. I have every thing reinstalled but now I am having problems with the PC sending the code to the machine. I have forgotten how everything has to be set. Any and all help welcomed. I have two jobs to do and can't send the code the the machine.

\

[javed08]

Hi,
I dont no which Hurco model u r having and which software u r using for communication. I have Hurco BMC20 & 30 and I am using SDNC for communication. Following are parameter to set:

HURCO
TYPE PC =MACHINE

BAUDRATE 9600= 9600
DATA BIT 7= 8
STOPBIT 1 =1
PARITY EVEN =NONE
HANDSHAKE Xon/Xoff =Xon/Xoff

Please feel free to mail for mor information javed.shaikh@aelgroup.com/javed08@rediffmail.com

Regards,
javed

[RON MEYER]

8, 1, none is setup for conversational programs. i believe you need to use 7, 1 0r 2, even for g-code file transfer. been a while since i've set one up, but if you call hurco and talk to steve artz, he can tell you for sure. ron