| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| HURCO Discuss Hurco machines here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-19-2007, 04:12 PM
| |||
| |||
| MB1 won't boot Got an MB1 that's got problems. It has been sat for a while, haven't had the time to work on it. Put a new encoder on the other day and cleaned out the carbon dust from the motors, a previous fault. Tried booting from disc as normal, gets to the choose language screen and then nothing happens when you choose 0 for English or any other number. I have tried removing/refitting all the plugs and wiring but still the same. Any one out there had a similar problem? Dave    |
|
#2
04-19-2007, 09:32 PM
| |||
| |||
| Try these guys....I use them and he is real good...nothing but hurcos.....free phone support. http://www.midwestcnc.com/page4.html Jim |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Hard Boot Procedure | a1a5115 | Fadal | 4 | 01-20-2007 08:59 PM |
| 2006 TM-1 won't boot up! | Edster | Haas Mills | 12 | 12-06-2006 08:12 PM |
| multi-boot two HDs | Karl_T | Computers and Networking | 3 | 06-21-2005 12:58 AM |
| No boot on EZ-Mill DX2 BPT | mmm2003 | Bridgeport and Hardinge Mills | 3 | 06-04-2005 11:28 AM |
| boot disk | spuzzbutt | TurboCNC | 3 | 12-01-2004 08:39 AM |
| | |
Linear Mode
