- Need Help!- Hurco - Siemens Mainspindle Problem
-
Registered
Hurco - Siemens Mainspindle Problem
Hi Guys.
I am new to this Forum (and to any Forums) . I don't even know how to find this post and answers after shutting down, but i'll try it anyway. So be patient with me please.
A Customer of me had a Failure of the Siemens Main spindle Controller Card 6SN 1121-0BA11-0AA1 on a Hurco 4020HT.
After Repair all the Parameters seem to be at some default state.
I have a list from Hurco and some Communication software from Siemens but that seems to be an old Dos program called ibs.
But i can't get that running. My oldest Computer is a windows xp pro with no com port. So i have to use a USB to Com Converter which is most likely not supported by DOS.
And the Dos Command Line does not do anything either.
Has anyone an Idea how to get them Parameters automatically in? Manually would probably take me days.
Similar Threads:
-
-
Member
Re: Hurco - Siemens Mainspindle Problem
You would need the IBS parameter file to load into a 4020 to start with. See if you can find an old Windows 95 or 98 PC to run the IBS software on. Once loaded, you will still need to set the orient position.
It may be worth enquiring if there is a later version of the software available to load the file into the drive.
- Need Help!- Hurco - Siemens Mainspindle Problem
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules