- Hurco conversational help - slots / cirlce milling on a bolt circle pattern
-
Registered
Hurco conversational help - slots / cirlce milling on a bolt circle pattern
Is there an easy way in Hurco conversational to mill a specific number of slots and or circle mill on a bolt hole pattern?
I know how to do it when drilling which can't be any easier but don't see how to do it when milling.
Similar Threads:
-
-
Member
Re: Hurco conversational help - slots / cirlce milling on a bolt circle pattern
Depending on what software you have you can from the drill cycle, bolt cirlce screen, convert to locations and then copy to pattern locations.
-
Member
Re: Hurco conversational help - slots / cirlce milling on a bolt circle pattern
Piece of cake
Use the PATTERN feature called LOOP ROTATE
You can mill a slot or a circle (not drill) and then rotate about an axis point any number of times
Rich
-
Registered
Re: Hurco conversational help - slots / cirlce milling on a bolt circle pattern
Wow thanks for the quick replies. I have only been using the Hurco winmax control for about 5 weeks now coming from Mazak.
Let me do more research on the Patter loop rotate option and see if I can pull this together . Certainly looks like that is what I need though.
- Hurco conversational help - slots / cirlce milling on a bolt circle pattern
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules