Hurco VMX64 - Invalid characters in Macro program

[trangt143]

Hi,

I load my boring macro program and review, it appeared "Invalid characters". why can't I put value in variables number inside of the program ?
this program is working on Haas machine

Thank you...

%(BORE)

(CHANGE VARIABLES AS IF NEEDED):
(CUTTING BY ADJUSTING THE BORING TOOL)

#1=40 (TOOL #)
#2=54 (WORK OFFSET#)
#3=0 (X COORDINATE)
#4=0 (Y CORRDINATE)
#5=100 (SPINDLE RPM)
#6=1.0 (TOP Z OF THE BORE)
#7=-2.0 (DEPTH OF THE BORE)



T#1 M06 (TOOL CHANGE)
G00 G90 G#2 X#3 Y#4 (WORK OFFSET)
S#5 M03 (SPINDLE ON)
G43 H#1 Z#6 (TOOL LENGTH OFFSET)
Z0.1 (Z0.1 BEFORE FEED-IN)
G01 Z#7 F0.5 (DEPTH)
M19 (ORIENT SPINDLE)
G01 Y-.030 F1.0 (MOVE Y.030 AWAY)
G01 Z#6 F25.0 (MOVE Z UP OUT OF THE HOLE)
G28 G91 Z0 M05 (HOME Z0)
M30 (PROGRAM END)
%

Similar Threads:

• max # of characters allowed in program line fanuc 31i
• Text program and invalid G code
• Yasnac invalid characters
• Need Help!- HURCO VMX64
• Testing program for Macro (Fanuc Macro B)

[steryd]

Isn't it necessary to put "O" and the program no right after first %?