Hurco machines and graphic

Results 1 to 1 of 1

Thread: Hurco machines and graphic

  1. #1
    Member
    Join Date
    Jul 2011
    Location
    United Kingdom
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Hurco machines and graphic

    Thank you for stopping

    Is there any way to find out which tape is doing a precise operation with hurco machine, without having the need to go on a computer with the CAD/CAM where the tape was made

    On Heidenhain machines you have a Test run page with a graphic which allows you to surf the pgm and do a test run starting with any tool call or any tape you want

    I would like to know if you can do the same directly on a hurco machines

    Thank you in advance for your support



  2. #2
    Member
    Join Date
    Nov 2006
    Location
    USA
    Posts
    473
    Downloads
    0
    Uploads
    0

    Default Re: Hurco machines and graphic

    On my ultimax II once you load a program, I can press the graphics button located above the trackball, and it will show the path of the cutter.


    Steve


    Sent from my iPhone using Tapatalk



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hurco machines and graphic

Hurco machines and graphic