Problem Hurco BMC 4020/HT ATC failure

Results 1 to 2 of 2

Thread: Hurco BMC 4020/HT ATC failure

  1. #1
    Registered
    Join Date
    Aug 2017
    Location
    Ireland
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Hurco BMC 4020/HT ATC failure

    Hi All,

    I'm working on a Hurco BMC 4020/HT milling machine whose ATC is not working properly.
    I'm able to do all movements, in manual mode, for the ATC: left, right, changing tool position, open door, close door.
    When machine is in auto mode, ATC is not working properly.
    There is not tool in the spindle. If I choose an empty slot for current tool and another slot for next tool, ATC does not move at all.
    If I choose 0 (zero) for current tool and another slot for next tool, spindle goes down, ATC goes right, then machine stops showing "ATC ERROR FOR SELECTED OPERATION".
    I do not know where to look now.
    I'd appreciate if anybody could give some advise to me where I'm supposed to look for.

    Thanks in advance,

    Felipe.

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2017
    Location
    Lithuania
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: Hurco BMC 4020/HT ATC failure

    Quote Originally Posted by felipe_pem_ie View Post
    Hi All,

    I'm working on a Hurco BMC 4020/HT milling machine whose ATC is not working properly.
    I'm able to do all movements, in manual mode, for the ATC: left, right, changing tool position, open door, close door.
    When machine is in auto mode, ATC is not working properly.
    There is not tool in the spindle. If I choose an empty slot for current tool and another slot for next tool, ATC does not move at all.
    If I choose 0 (zero) for current tool and another slot for next tool, spindle goes down, ATC goes right, then machine stops showing "ATC ERROR FOR SELECTED OPERATION".
    I do not know where to look now.
    I'd appreciate if anybody could give some advise to me where I'm supposed to look for.

    Thanks in advance,

    Felipe.
    Dear I hade similar problem

    Try To go to spindle presing F2 then ATC diagnistic,
    Then you see all posible operation that you can do

    Try look at buttom ATC not at HOME position
    then write here i will give other step by step that to do

    Hurco BMC 2416


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hurco BMC 4020/HT ATC failure

Hurco BMC 4020/HT ATC failure