Originally Posted by
felipe_pem_ie
Hi All,
I'm working on a Hurco BMC 4020/HT milling machine whose ATC is not working properly.
I'm able to do all movements, in manual mode, for the ATC: left, right, changing tool position, open door, close door.
When machine is in auto mode, ATC is not working properly.
There is not tool in the spindle. If I choose an empty slot for current tool and another slot for next tool, ATC does not move at all.
If I choose 0 (zero) for current tool and another slot for next tool, spindle goes down, ATC goes right, then machine stops showing "ATC ERROR FOR SELECTED OPERATION".
I do not know where to look now.
I'd appreciate if anybody could give some advise to me where I'm supposed to look for.
Thanks in advance,
Felipe.