Hurco VM10i Adjust the clock on the control

Results 1 to 4 of 4

Thread: Hurco VM10i Adjust the clock on the control

  1. #1
    Registered porkchop831's Avatar
    Join Date
    Jun 2006
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Hurco VM10i Adjust the clock on the control

    Does anyone know how to set the clock on the control? It's the small one in the lower right corner of the control...Thank you in advance for helping.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2008
    Location
    England
    Posts
    929
    Downloads
    0
    Uploads
    0

    Default Re: Hurco VM10i Adjust the clock on the control

    Get the keyboard and press Ctrl then Esc.
    Tap the little green tab that appears on the left.
    Tap Control panel.
    Double tap date and time.
    Set the time like you would on your PC.
    Apply.
    Close windows.
    Tap left green tab again.
    Scroll to the bottom and tap Return to Winmax.



  3. #3
    Registered porkchop831's Avatar
    Join Date
    Jun 2006
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Hurco VM10i Adjust the clock on the control

    Quote Originally Posted by bloke View Post
    Get the keyboard and press Ctrl then Esc.
    Tap the little green tab that appears on the left.
    Tap Control panel.
    Double tap date and time.
    Set the time like you would on your PC.
    Apply.
    Close windows.
    Tap left green tab again.
    Scroll to the bottom and tap Return to Winmax.
    Perfect!! Thank you so much! Worked like a charm.



  4. #4
    Registered
    Join Date
    Jun 2008
    Location
    England
    Posts
    929
    Downloads
    0
    Uploads
    0

    Default Re: Hurco VM10i Adjust the clock on the control

    Nifty!
    ��



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hurco VM10i Adjust the clock on the control
Hurco VM10i Adjust the clock on the control