- Problem- Hurco spindle fumes
-
Registered
Hurco spindle fumes
I have a hurco vm1 that when the spindle runs, the air cooling for the spindles bearings vents into the main enclosure. Are there supposed to be seals in the main spindle cover to stop this, as there is just a hole letting masses of air in that you can feel leaking around the tools that are in the spindle. Hurco says you should not be able to feel air leaking in but there are no seals present in the cover to stop it.
Similar Threads:
-
-
Member
Re: Hurco spindle fumes
There is a little tap under the cover on the right side of the head that can be used to reduce the flow,
- Problem- Hurco spindle fumes
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules