Source of way cover wiper material for VM1?

Results 1 to 8 of 8

Thread: Source of way cover wiper material for VM1?

  1. #1
    Member
    Join Date
    Jul 2004
    Location
    United States
    Posts
    242
    Downloads
    0
    Uploads
    0

    Default Source of way cover wiper material for VM1?

    Has anyone dealt with this problem? I need to replace the wiper material in my way covers, not a big job in itself, problem is finding the wiper material. I estimate I need about 50 feet to do all of the covers, about 36" per wiper. I can get the material from Hurco
    P/N 6190001015, WIPER, WAYCOVER, VM1/2/3, $290/meter

    $4700 for rubber strip is asinine. I checked a number of the companies that make the material but none seem to have the profile used on a Hurco.

    Similar Threads:


  2. #2
    Member FannBlade's Avatar
    Join Date
    Jun 2011
    Location
    USA
    Posts
    695
    Downloads
    0
    Uploads
    0

    Default Re: Source of way cover wiper material for VM1?

    I would be interested in this answer also.



  3. #3
    Registered deputydawg's Avatar
    Join Date
    Oct 2013
    Location
    Erie, PA, USA
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default Re: Source of way cover wiper material for VM1?

    This link was way shorter before I cut and pasted it, but it's basically waywiper.com. There's been previous posts here before as well that may have other suggestions.


    Way Wipers, rubber wipers, slideways, way wiper



  4. #4
    Member
    Join Date
    Jul 2004
    Location
    United States
    Posts
    242
    Downloads
    0
    Uploads
    0

    Default Re: Source of way cover wiper material for VM1?

    Here are some close up pics of the profile, it wipes with both a front facing lip & a rear facing lip and is retained by the hump resting in the channel.

    Source of way cover wiper material for VM1?-pic3-jpg

    Source of way cover wiper material for VM1?-pic2-jpg

    Source of way cover wiper material for VM1?-pic1-jpg



  5. #5
    Member
    Join Date
    Jul 2004
    Location
    United States
    Posts
    242
    Downloads
    0
    Uploads
    0

    Default Re: Source of way cover wiper material for VM1?

    Quote Originally Posted by deputydawg View Post
    This link was way shorter before I cut and pasted it, but it's basically waywiper.com. There's been previous posts here before as well that may have other suggestions.

    No go, sent them a pic and they don't have that profile wiper.



  6. #6
    Registered deputydawg's Avatar
    Join Date
    Oct 2013
    Location
    Erie, PA, USA
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default Re: Source of way cover wiper material for VM1?

    I found another place that may have something. It's mimwaycover.com



  7. #7
    Member
    Join Date
    Jul 2004
    Location
    United States
    Posts
    242
    Downloads
    0
    Uploads
    0

    Default Re: Source of way cover wiper material for VM1?

    I pulled a cover to remove a piece for a pic and measurement. It measures 12mm wide. The rear tail is about 3mm, middle 4mm and the lip about 5mm


    Source of way cover wiper material for VM1?-wiper-jpg



  8. #8
    Registered
    Join Date
    Jul 2016
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Source of way cover wiper material for VM1?

    Did you ever find any wipers that work? I need the same for a vm2.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Source of way cover wiper material for VM1?

Source of way cover wiper material for VM1?