Follow this link to the Hurco Web Page FAQ's
Support FAQs - HOW TO HOOK UP A RS 232 CONNECTION TO A HURCO...
We have many older Hurco machines both Max 2 and Max 3 era. We have lost the disk drives on a couple of the older Max 2's and are finding it harder and harder to find replacements. I am wanting to use the RS232 communications to try back up the programs and was trying to use Procomm the same as I do on an older Nagitta mill. I was hoping someone could help and let me know if this could be done. I know you can use the Conversational up/down program from Hurco but I was hoping to be able to keep using the program we are currently using (Procomm) to do the same. Thanks
Thanks for the advise. I have gone over the procedure and notice it needs to use the HD3 Serialize utility. I tried to find this on the FAQ site with no luck. Do you have any suggestions as to where I can find it. Thanks. John
will do, thanks again.