Get KMB-1 off limit switch

[JohnF]

I haven't operated one of these in many years despite that fact that I've owned one for 10+ years now. I have this KMB-1 on the Y axis limit switch (proximity). I can't remember the procedure to get it off the limit. This machine has been sitting for several years and when I fired it off the Y axis just drifted it's way to the limit switch. I remember having problems sometimes getting these off the limit but can't remember what I had to do to accomplish it. The handwheel doesn't work either..seems to me you needed to use that to back off the limit but I can't recall.

Suggestions por favor...a little memory jogging is in order here.

JohnF

Similar Threads:

• Omron Snap Switch V-156-1C25 Solderless Limit Switch
• Limit switch replacement with proximity switch?
• limit switch and home switch setup
• Limit Switch / Home Switch in Software

[underthetire]

Thought you just turned the screw by hand. Don't those have the hole in the cover to insert a tool to turn the screw?