- Get KMB-1 off limit switch
-
Member
Get KMB-1 off limit switch
I haven't operated one of these in many years despite that fact that I've owned one for 10+ years now. I have this KMB-1 on the Y axis limit switch (proximity). I can't remember the procedure to get it off the limit. This machine has been sitting for several years and when I fired it off the Y axis just drifted it's way to the limit switch. I remember having problems sometimes getting these off the limit but can't remember what I had to do to accomplish it. The handwheel doesn't work either..seems to me you needed to use that to back off the limit but I can't recall.
Suggestions por favor...a little memory jogging is in order here.
JohnF
Similar Threads:
-
-
Member
Thought you just turned the screw by hand. Don't those have the hole in the cover to insert a tool to turn the screw?
- Get KMB-1 off limit switch
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules