Results 1 to 2 of 2

Thread: Hurco KM-3

  1. #1
    Registered
    Join Date
    Mar 2007
    Location
    USA
    Posts
    108
    Downloads
    0
    Uploads
    0

    Question Hurco KM-3

    I Have a hurco KM-3. Through the winter it would not boot up. Then all of a sudden it started working. Now it doing it again. all of the normal lights are on except the personally board. When the personally led is lit, it's boots up ok. I tried resenting all the boards. All the hard drive information is there. It is a MAX 32. What can I do to find out what is going on. All I get "Executing power on self test" and that's all.
    Dave
    Last edited by Dave Rothermel; 04-24-2011 at 07:46 PM.


  2. #2
    Registered
    Join Date
    Mar 2007
    Location
    USA
    Posts
    108
    Downloads
    0
    Uploads
    0

    Talking Hurco KM-3

    After messing with the hurco all weekend cleaning connectors on boards,
    I Thought I would try to boot to a floppy. The disk wouldn't go in the drive.
    I took out the disk that i left in there, and it booted up. I was so sure I had a problem that I was not thinking. Problem solved


Similar Threads

  1. Replies: 2
    Last Post: 01-05-2010, 06:26 PM
  2. Hurco, KM-1
    By dafowfidy in forum Bridgeport and Hardinge Mills
    Replies: 2
    Last Post: 11-07-2008, 06:18 PM
  3. HURCO BMC 20
    By PCM in forum HURCO
    Replies: 4
    Last Post: 03-30-2008, 08:11 AM
  4. hurco vm1
    By copperhead4321 in forum CNC Machining Centers
    Replies: 0
    Last Post: 12-01-2007, 01:05 PM
  5. Hurco
    By 78 stingray in forum Post Processor Files
    Replies: 0
    Last Post: 02-03-2007, 07:03 PM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.