Hurco Spindle Drive Swap

[wolfy11511]

CAn anyone tell me if these two drives can be swapped: A06B-6055-H106 and AO6B-6055-H108? I have a BMC 30 and a BMC 50 both have seperate issues. Neither of them are running at the moment, I need at least one of them. I believe the drive may be the issue on the 30 and I know the drive on the 50 is good.

I appreciate any advice anyone has.

John

[underthetire]

It will work, but you would need to re-configure it. The H108 could smoke the motor on the smaller machine.

[wolfy11511]

Thanks for the reply, any ideas on how to reconfigure it?