| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| HURCO Discuss Hurco machines here. |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-14-2010, 04:17 PM
| |||
| |||
Hi all, Just wanted to let you guys know about my problem today with my X-Axis on a Hurco Hawk 5 knee mill. It suddenly began to jig back and forward as it travelled in the X - direction... I hit the E-stop and investigated. After taking the motor off and removing the encoder cover and then the encoder I discovered that the coupling between the end of the servo shaft and the encoder had sheared... £33:00 2hours later and a trip to a local supplier and all was fixed. Everything works fine and is as accurate as before. Just wanted to share my experience. Have fun guys !   |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sharing my new design | veteq | Vertical Mill, Lathe Project Log | 15 | 05-08-2010 03:54 PM |
| Sharing my LCD install to 93 VMC15 | FastFieros | Fadal | 9 | 10-18-2009 10:38 PM |
| Newbie- Mastercam art sharing | cnc metalcraft | Mastercam | 1 | 02-18-2008 06:22 PM |
| Info sharing | SPEEDRE | CNCzone Club House | 2 | 12-23-2006 12:03 PM |
| Sharing Cad/Designs/G-Code!! | bill south | G-Code Programing | 1 | 08-23-2005 08:41 AM |
| | |
Linear Mode
