I reluctantly purchased a tension/compression head about 4 months ago, now that's all I use.
Unfortunately, the T/C tapping head is programmed as a regular Gcode tool.
S500M3
Approach
G1Z-???? F (10% slower than actual lead)
M4
G4P.3
G1Z.25 F (10% faster than actual lead)
M3
G4 P.3
Move to next hole repeat or paste tap cycle.
Before I got my T/C tapping head, I always used a Tapmatic head. The way I do it now is so easy, I don't use the Tapmatic any more.