| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Hobbycnc (Products) Discuss Hobbycnc controller boards here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-02-2010, 11:43 PM
| |||
| |||
My Hobby Pro Board quit while I was testing it with Mach3. With over a dozen succesful tests, this was the longest test todate, about 20 minutes into the program it quit with no warning. Now U7 gets hot and the 24v fan trys to start but then stops. When power is applied the X and Y motors jump but don't hold and their is no responce from Z. Any help would be qreatly appreciated  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- V21 mach3 post quit!?! | speedofsound | BobCad-Cam | 0 | 11-09-2009 12:38 PM |
| running mach3 | woodman08 | Machines running Mach Software | 4 | 02-26-2008 10:21 AM |
| Problem- V22 Quit Running | TZ250 | BobCad-Cam | 1 | 02-14-2008 07:06 AM |
| Laptops Running Mach3? | Fred Kelly | Shopmaster/Shoptask | 5 | 09-10-2007 08:07 AM |
| Spindle quit running w/ c axix fault | TomCNC88 | Fadal | 7 | 07-28-2006 10:07 AM |
| | |
Linear Mode
