CNCzone.com-The Largest Machinist Community on the net!



Home Page Mark Forums Read Today's Posts My Replies Classifieds Reviews Photo Gallery Web Links Share Files Advertise With Us Ad List
Go Back   CNCzone.com-The Largest Machinist Community on the net! > Electronics > Hobbycnc (Products)
mach2 mach2
Register Blogs FAQ Donate Calendar Search Today's Posts Mark Forums Read Videos


Hobbycnc (Products) Discuss Hobbycnc controller boards here.


This forum is sponsored by:
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Ban this user!
Old 02-18-2005, 04:07 AM
BAM BAM is offline
 
Join Date: Dec 2004
Location: USA
Posts: 9
BAM is on a distinguished road
Red face mach2
permalink
Will this controller work with mach2 software?
Tweet this Post!Share on Facebook
Reply With Quote

  #2   Ban this user!
Old 02-18-2005, 05:11 AM
 
Join Date: Apr 2003
Location: UK
Posts: 1,080
kong is on a distinguished road
permalink
Yep, Mach2 will work with any driver board that takes step and direction input via the parallel port.
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Tweet this Post!Share on Facebook
Reply With Quote

  #3  
Old 02-18-2005, 05:46 AM
*Registered*
  
Join Date: May 2004
Location: United States
Posts: 198
HobbyCNC is on a distinguished road
permalink
Originally Posted by BAM
Will this controller work with mach2 software?
Yes, and there is a file uploaded to our support group hosted by Yahoo named "hobbycnc" that helps with the setup. A link is on our homepage

Dave Rigotti
hobbycnc.com
Tweet this Post!Share on Facebook
Reply With Quote

  #4  
Old 05-02-2005, 01:30 AM
miljnor's Avatar
S.N.A.F.U.
  
Join Date: Jan 2005
Location: usa
Posts: 1,809
miljnor is on a distinguished road
permalink
Originally Posted by hobbycnc
Yes, and there is a file uploaded to our support group hosted by Yahoo named "hobbycnc" that helps with the setup. A link is on our homepage

Dave Rigotti
hobbycnc.com

hi dave,

I couldn't find the file (maybe i am dense) what is it named?
__________________
thanks
Michael T.
"If you don't stand for something, chances are, you'll fall for anything!"
Tweet this Post!Share on Facebook
Reply With Quote

  #5  
Old 05-02-2005, 04:22 AM
*Registered*
  
Join Date: May 2004
Location: United States
Posts: 198
HobbyCNC is on a distinguished road
permalink
Originally Posted by miljnor
hi dave,

I couldn't find the file (maybe i am dense) what is it named?
"Mach2 XML files for 4AUPC" In the files section on our Yahoo hosted support group.

Dave Rigotti
HobbyCNC.com
Tweet this Post!Share on Facebook
Reply With Quote

Sponsored Links
  #6  
Old 05-02-2005, 11:57 AM
miljnor's Avatar
S.N.A.F.U.
  
Join Date: Jan 2005
Location: usa
Posts: 1,809
miljnor is on a distinguished road
permalink
thats what i thought. I tried that one and it didn't work. but one of the guys that works for me told me that the fils has to be an xml file and the explorer saves it as an html file...


so I got it but failed to save it in the right format...


thanks for the quick reply... and I will try it when i get home tonight.
__________________
thanks
Michael T.
"If you don't stand for something, chances are, you'll fall for anything!"
Tweet this Post!Share on Facebook
Reply With Quote

Reply



« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mach2 remembering position after shutdown..how does it know Moondog Mach Software (ArtSoft software) 10 02-14-2005 09:56 AM
Windows XP or Windows 2000 better with Mach2 Beezer Mach Software (ArtSoft software) 2 10-18-2004 11:08 AM
Mach2 Faro Arm Inverse Kinematics vacpress General CAM Discussion 7 05-28-2004 10:14 AM
G Code and Mach2 InventIt DIY-CNC Router Table Machines 8 03-13-2004 02:46 PM
mach2 versus EMC georgebarr Mach Software (ArtSoft software) 3 02-22-2004 12:32 PM




All times are GMT -5. The time now is 09:51 PM.

Contact Us - CNCzone.com - Privacy Policy - Archive - Terms of Service - Top




Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO
Template-Modifications by TMS
CNCzone,LLC Copyright ©2007,2008

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353