| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Hobbycnc (Products) Discuss Hobbycnc controller boards here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-15-2009, 10:34 PM
| |||
| |||
This is the first hobby board I have put together and the motors don't have near the torque as they do with my other two controllers. I'm using the same transformer and filter, (24v, 10amp) in them. They are 3amp 8 lead motors 280 oz 2.7v. I have one mill that the screw is a little off when it gets to the end and it stalls the pro no matter how I set it. My geckos don't even know the screw is off. I have tried 1/2 step and the controller turned all the way up. This is the same on all three axes. Is this normal for this controller or do I have something wrong. Thanks Ed  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Am I making the pipe weak? | teamtexas | Casting Metals | 2 | 11-08-2008 11:39 AM |
| Servo is weak when using a gecko 320... | bitviper | Gecko Drives | 11 | 05-19-2008 02:02 PM |
| stepper motors or servo motors? | jprobst | Torchmate | 3 | 07-13-2007 05:37 PM |
| Motors too weak, bad ball screws or software issues?? pics of messed up parts... | Mueller | General Metalwork Discussion | 0 | 07-09-2007 10:55 AM |
| Gecko 201's.... 1 running rough, and 1 seems weak... | InspirationTool | Gecko Drives | 6 | 01-08-2007 11:31 AM |
| | |
Linear Mode
