| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Hobbycnc (Products) Discuss Hobbycnc controller boards here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-26-2009, 04:28 PM
| |||
| |||
Need a little help, I have hooked my hobby cnc board to x,y and z, both x and y jog back and forth no problems, z is another story i checked the voltage on the x and y got the same readings, z is not getting anything, what am I doing incorrectly?Any Ideas?  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| PCB MILLING WITH BAD RESULTS | cwiliam | PCB milling | 7 | 06-15-2009 04:15 PM |
| DPRNT- ignore if no printer connected | pieface | Fanuc | 5 | 11-07-2007 07:43 AM |
| Strange results when zeroing z axis | millbilly | Mach Mill | 5 | 06-29-2007 01:49 AM |
| Wrong side of circle is connected. | rocky | GibbsCAM | 3 | 08-23-2006 09:31 PM |
| Poor results, help please! | Swede | Hard and High Speed Machining | 8 | 04-03-2004 10:23 PM |
| | |
Linear Mode
