| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Hobbycnc (Products) Discuss Hobbycnc controller boards here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-06-2007, 09:08 PM
| |||
| |||
hi,all this my first post (well second)messed up first time replied to, well someone.anyway i think this is where i need to be,building my rig and have several parts for it.it will be made from steel and alum.i wont be able to purchase my 302motors untill probally after the holidays i was wonderin if anyone knew the bolt pattern dimension for the motors are. thanks in advance Rick  |
|
#2
12-18-2007, 09:12 AM
| |||
| |||
Hello, I just measured my 300oz motors and they are .200 in hole size and they are 1 27/64" apart (Four holes of course)... Hope this helps |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
