| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Hobbycnc (Products) Discuss Hobbycnc controller boards here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-25-2006, 04:10 PM
| |||
| |||
Debating beween Xylotek and Hobby CNC and was wondering if anyone has hooked up either a DIY probe or the Desknc probe to a hobbycnc board. I am leaning towards the hobby primarily all of the great feedback but I want to have a probe on my machine for a couple items and thought I would check first. Any info would be great.    |
|
#2
09-11-2006, 09:20 PM
| |||
| |||
| I just hooked a probe up using my HobbyCNC rig and TurboCNC v 4.01. I used the limit power out of the HobbyCNC board, and pin 11 into TurboCNC for the probe. I've built several home-brew probes...I may have finally got one that will work properly on this last try! John |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
