Hobby CNC pin setting

[Milton]

Could someoen give me the pin setting for steps on a Hobby CNC board.

Pin out for full steps, 1/2 steps and 1/4 steps.

I have misplaced my instructions.

Thanks
Milton

[WoodSpinner]

Originally Posted by Milton Could someoen give me the pin setting for steps on a Hobby CNC board. Pin out for full steps, 1/2 steps and 1/4 steps. I have misplaced my instructions. Thanks Milton

which board?

[Milton]

Guess that would help. LOL

Pro chopper board

thanks
Milton

[WoodSpinner]

Originally Posted by Milton Guess that would help. LOL Pro chopper board thanks Milton

thats the same as mine, I'll get my instruction sheet from the shop in the morning.

John

[Barefooter]

I'm not sure if that is the same board that I have. If not, just ignore. I have the 4AUPC Chopper Board.

Settings:

Synchronous = J1 OFF

Asynchronous = J1 ON

1/2 step = J2 OFF J3 OFF

1/4 step = J2 ON J3 OFF

1/8 step = J2 OFF J3 ON

1/16 step = J2 ON J3 ON


Hope this helps,
Gregg

[Barefooter]

Actually, I think these are the settings you are looking for...

1/1 step = J1 ON J2 ON J3 OFF

1/2 step = J1 ON J2 OFF J3 OFF

1/4 step = J1 OFF J2 ON J3 ON

1/8 step = J1 OFF J2 ON J3 OFF

1/16 step = J1 OFF J2 ON J3 ON