Whats needed?

[HobbyCNC]

Originally Posted by muleworks I hate to tell you but hobby cnc is a rib off. They sell products and then leave you hanging saying "go ask someone else in the group" instead of call me at --------- or email me at blank. I asked him if the kit would work for a plasma cutter and he finially emailed me 3 days later saying he didn't know. Piss on him, its too many others out there that offer good support for just a little more money. Chris

I guess in your eyes we would have been better off LYING to you and said "SURE" it works instead of the HONEST answer you rec'd.

I refered you to a general interest CNC group to see if any of our customers had used our products for such an application for feedback. It may come as a shock to you, but not many orders accompany the actual use of the product. We simply had no feedback to offer for your intended application.

Dave Rigotti
HobbyCNC.com

[Bzooka]

Why don't you cut the guy some slack. Maybe he was busy doing other things and could'nt email you back right that minute. I just purchase some items from the guy, and had no problems at all.

[happycamper56]

dneisler,

look on WEB site http://www.ktmarketing.com/CNC.html you'll find most answers on your question and you can educate your self in CNC machines if you need more info let me know
Happycamper56

[happycamper56]

dneisler,
I'm sorry dneisler, but you start building your CNC machine like building house from the roof. first you have to find out what are you wanted to do, then build the frame, then choose the screws ratio etc. then you looking for board, motors and software which will move all things, then you have to make detail setup of your motors so will respond correctly to your software, most manufacturing supply those info with them motors and boards, I have no idea what are you have in hand, what brand name and what motors are they servo or steppers. 200oz is kind small but like I said depend what you want to do with them. I have near 1000 sites info on any kind combination of building CNC platform. I sitting in this since 1980 and I build few CNC machines my self from the scratch. I find this forum today and read very careful what is going on here. I do not sell anything here, I'm just here for fun and if I can help someone in building machine set the machine and program the machine...
Best of luck
happycamper56