Standard NEMA 23 MOUNTING. About 2 1/4" square and the case is @3" long
Hi Guys !
My first post, after reading all the way through this amazing site !
I have my 910x2000mm router all drawn up, and I want to use the uGetAllElectronics-super-4axis-200oz-kickass-kit from hobbyCNC. I like having all the details and drawings ready, but I am missing dimensions on the motors.
The FAQ on this forum gives the dimension on NEMA23, but i googled NEMA23 and there seems to be a minor disagreement. A general width and length on the motors would be nice as well.
Go to this page http://www2.catalognavigator.com/ori...=spec&filter=0
Under Additional info on the right side, click on more specs to get a .pdf with Nema 23 sizes. Note that the lengths can vary.
Mach3 2010 Screenset
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)