#23-305-DS8A Pinout

Results 1 to 3 of 3

Thread: #23-305-DS8A Pinout

  1. #1
    Registered
    Join Date
    Aug 2007
    Location
    USA
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default #23-305-DS8A Pinout

    I purchased 3 of the motors listed above and a 3 axis controller from HobbyCNC. Some how I cannot find the single sheet of paper that comes with the motors which describes how to connect the motor to the controller.

    I registered on Friday August 3 for the Yahoo forum. But because Hobbycnc is closed, I have not been "approved" to view the forum yet.

    I simply need the correct pin connections for the 8 wire "23-305-DS8A."

    Could someone please help me with this problem?

    Rick

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2005
    Location
    Canada
    Posts
    281
    Downloads
    0
    Uploads
    0

    Default

    Answered on the other post.
    John



  3. #3
    Registered
    Join Date
    Oct 2007
    Location
    USA
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default 23-305-DS8A pinout

    The very short reply of "Answered on another post" is not very helpful. Could you direct the buyers of the CNC kit to which post you are referring to? There was a schematic in my kit but no way of knowing which color wire from the stepper motor goes where.

    Bob Corder



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

#23-305-DS8A Pinout

#23-305-DS8A Pinout