- Need Help!- Only Y works correct X don't work Z works one direction only
-
Registered
Only Y works correct X don't work Z works one direction only
Hi
I have a mill with 3 axis pro board,(Hobbycnc) the mill worked great 4 years ago after moving and atorage and rebuild - now I only get Y axes to work
right
X Axis :
No movement but it locks up
I have the 3A steppers on the masjine so the motor setting on the board should be set to 0.42v but if set to maksimum - I only get 0.23v - Both Y and Z axis are set to 0.42v
The question is - why only 0.23v and is this why X dont move
The 5v test gives 5.03v
Z Axis :
Moves only in one direction does not matter if Mach 3 are told to move up or
down Z just move up
Is this becouse of above problem with X or is this something else
Using mach 3
EPP printer port
Mach3 are set pin 3 = x step, 2 = x dir 5 = y step 4= y dir 7 = z step 6 = z dir
Please help
Similar Threads:
-
-
Registered
Hi, I am have the exact same problem, spent many hours trying to figure it out..... ever fix yours?
-
Registered
I have one of these working
I have a hobby cnc pro board working. I am looking for a schematic for the board.
Thanks
Last edited by hollisin; 06-10-2012 at 07:52 PM.
Reason: add content
- Need Help!- Only Y works correct X don't work Z works one direction only
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules