Will these stepper motors work?

Results 1 to 2 of 2

Thread: Will these stepper motors work?

  1. #1
    Registered
    Join Date
    Sep 2006
    Location
    US
    Posts
    37
    Downloads
    2
    Uploads
    0

    Default Will these stepper motors work?



  2. #2
    Member awerby's Avatar
    Join Date
    Apr 2004
    Posts
    5728
    Downloads
    0
    Uploads
    0

    Default Re: Will these stepper motors work?

    They would probably work, but aren't ideal. That board won't tolerate more than 42 volts, but those motors want about 55v for best performance. If you haven't bought them yet, look for some with less inductance. 2 mH or less would be preferable.

    [FONT=Verdana]Andrew Werby[/FONT]
    [URL="http://www.computersculpture.com/"]Website[/URL]


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Will these stepper motors work?

Will these stepper motors work?