They would probably work, but aren't ideal. That board won't tolerate more than 42 volts, but those motors want about 55v for best performance. If you haven't bought them yet, look for some with less inductance. 2 mH or less would be preferable.
I have the HobbyCNC 3 axis Pro board and was wondering if these steppers are compatible.
https://www.omc-stepperonline.com/do...HS39-3008D.pdf
Steve
Similar Threads:
They would probably work, but aren't ideal. That board won't tolerate more than 42 volts, but those motors want about 55v for best performance. If you haven't bought them yet, look for some with less inductance. 2 mH or less would be preferable.
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]