If you are talking about the 24v fan voltage on a HobbyCNC board, then NO WAY! 2 amps is a helluva lot. That output is only to drive a small fan at a few tenths of an amp.
I wish to improve the lighting on my CNC machine, Would it be possible to connect both thhe fan and a 24v 5m led strip to 24v fan terminal. LED strip is 48W total 2 AMP Max.
Many thanks in advance.
Similar Threads:
If you are talking about the 24v fan voltage on a HobbyCNC board, then NO WAY! 2 amps is a helluva lot. That output is only to drive a small fan at a few tenths of an amp.
WoodWorkerB
WoodWorkerB.com
Thanks for the advice
bigz- empty your private mesage folder!!
all good over here. glad u didnt get flattened!
got a few new machines and having fun!
swapped to uccnc software to run everything now- much better than mach3.
if your on facebook- join my group
cnc machines and parts uk
are you still in the place with old biesse machines?
still doing hobby stuff?
UCCNC powered uk machine sales
https://cncrouter.uk/atc-cnc-routers.htm