Results 1 to 4 of 4

Thread: Scanning Microfiche

  1. #1
    Registered
    Join Date
    May 2004
    Location
    Australia
    Posts
    36
    Downloads
    0
    Uploads
    0

    Scanning Microfiche

    H Guys

    Not sure I put this in the right place of the forum so if the moderator whats to move it please do.I am looking at making myself a scanner to scan Microfiche. There are commericail versions out there like:

    "http://www.youtube.com/watch?v=g5uiMLT2VwI"]YouTube - DRS Digitiser

    Basically it uses a 2 axis table with a cctv camera to scan the images . What I want to know is if anyone knows about different lenses I could use . I played around with a standard cctv camera used for surveillance the other day and it could easliy see hair follicles. The images I want to scan in are 48x maginifaction fiche's


    Any help with choosing a camera and lense would be helpful

    Paul


  2. #2
    Registered
    Join Date
    May 2006
    Location
    USA
    Posts
    346
    Downloads
    0
    Uploads
    0
    I have an old one if you want it cheapo, (pay for packing and shipment +$25)
    Been doing this too long


  3. #3
    Registered
    Join Date
    May 2004
    Location
    Australia
    Posts
    36
    Downloads
    0
    Uploads
    0
    I dont want something cheap if its not going to work :-) Need some info on which lenses are good for the purpose


  4. #4
    Registered
    Join Date
    May 2006
    Location
    USA
    Posts
    346
    Downloads
    0
    Uploads
    0
    This unit has the lenses, lights, is complete and cheap because the next place it goes is in the trash can. Under $60 includes shipping.
    Been doing this too long


Similar Threads

  1. scanning people
    By fred friendly in forum 3D Scanning
    Replies: 15
    Last Post: 08-11-2011, 11:05 PM
  2. scanning on the tormach
    By RB1 in forum Tormach Personal CNC Mill
    Replies: 4
    Last Post: 01-10-2008, 01:18 PM
  3. Scanning Plans to Dxf
    By ClockMaster in forum WoodWorking
    Replies: 8
    Last Post: 12-25-2007, 02:46 AM
  4. Is this the way 3d scanning will go ?
    By greybeard in forum Digitizing and Laser Digitizing
    Replies: 5
    Last Post: 02-15-2007, 12:52 PM
  5. scanning a drawing
    By kenlambert in forum BobCad-Cam
    Replies: 5
    Last Post: 03-08-2004, 01:47 AM

Posting Permissions


 


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed


Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.