3D Audi TT

[Kristoffersen]

Hi
Do any of you know where I can find a nice detailed 3D solid drawing of an Audi TT?
My plan is to mill a small copy..

Thanks ahead!

[irving2008]

there are some 3D drawings available...

the place to ask is on http://www.tt-forum.co.uk but I'll have a look round for you...

or you could just have the real thing

[irving2008]

hmmm... the one that was there has been removed, for copyright reasons I suspect...

you can buy the 3D models from various places for about $70 e.g. http://www.3dcadbrowser.com/browse.a...e=2&category=2

or $16 http://www.linefour.com/3D-CARS/Audi...uct-flyer.html

or free here: http://www.sharecg.com/v/7808/3D-Mod...e-3d-max-model

let me know how you get on..

[phungi]

The sketchup model warehouse has some good TT's.
If you need higher res/quality mesh, try turbosquid

[fabconv]

hello
my first post!
have you find what you want
i've modeled (draw in 3d) one in solidworks

[Kristoffersen]

Hi, I have not found one yet. Will you post it to me? ;-)

[fabconv]

no problem
what format: stl, iges, ... ?

do you have a cnc, i want to buy or build one

[Kristoffersen]

I should be able to read solidworks files but maybea its an idea to try .stp .stl .iges ... Sometimes it can be hell to make convertions work ;-)

I have a Supermax FV56 A and a Deckel FP2 NC.

Is it for hobby or prof. use?

[fabconv]

it look like this



it's in your email (6Mo in iges)

the stl file is 18Mo: i need a solution to send big files

impossible in step because it's a "surfacic work"

(i want a cnc for hobby use)

voila

[Kristoffersen]

Hi, I cant se anything in my mailbox.. did I PM you the right adress..

[fabconv]

check again

[fabconv]

i will put everything on a ftp site (too big for email maybe)
give me 10 mn