wood copy duplicator machine

[Pugster]

Hello I need somone to build me a wood duplicator so I may carve police plaques. If anyone knows where I can get one made , please advise.I would perfer to be contacted by e-mail or private message.

[jtriggs]

Try www.Terrco.com and/or www.wood-carver.com
I have one I am building using aluminum extrusions and parts from 80/20
and linear components from sources on Ebay. It's half done and costing
alot more than I counted on. Buy a pre-made one. It's cheaper in the
long run and no headaches.

Jim

[kkilst]

Just happen I am also interested with wood duplicator, and has been looking
with various design. Most with linear guide way, roller like Androni or
LaNova Scolpitrice with pantograph. Only the pantograph design has the
sensitive feeling for duplicating intricate wood ornamental.
I would be most interest to share experience to build pantograph linkages,
for smaller machine with 4-spindles. Area of interest is the joint linkages
bearing used.

[mkelly]

You might try Carvewright. They are a new company and seem to have a great product for the money. http://carvewright.com/

I don't know if they have a duplicator yet, but you can input a copy from almost any drawing package or snapshot and duplicate it in 3D. Nice system for the $.

ShopBot has a Benchtop machine that can digitize and duplicate any 3D object for a little more outlay in cash. They have a special on it running through tomorrow (June 30th). http://www.shopbottools.com/?gclid=C...FUOuIgodVRTNxA

[turmite]

Guys I have a 4 spindle carver that I would like to sell. It will be best be used for flat work but is currently set up for knife handles. If anyone is interested contact me at my business email address. You need to put 4 spindle carver in the subject line so I don't dump the email as spam. Address is:

turnercustoms@earthlink.net

Mike

ps I don't have pics but can get them

[bgolash]

Hi
Here`s one I finished a while back. Now that I have my DIY
router running I have no need of the duplicator. It can do
a part with a width of 10 inches and a length of 24 inches
Regards Barry

[Pugster]

Would you be interested in selling?

[memilanuk]

http://www.copycarver.com/

[Rockyr_Va]

http://www.copycarver.com/index.htm
This is a place for a "plan set that cost $20.00... might be a good place to get started....
Rockyr_va

[CJL5585]

I uploaded these photos a while back on another thread.

A wood duplicator to make stocks for flintlock rifles.

http://www.cnczone.com/forums/showthread.php?t=21010

Jerry

[mdreitzusa]

would this work for what you wnat to do.
CARVING REPRODUCTION MACHINE
http://www.harborfreight.com/cpi/cta...emnumber=41662

[dtoggs]

Hello Pugster,I just joined the other day and googled up your wood duplicator input. I made a parallel arm duplicator and would be willing to share my thoughts on making one like mine or discussing the linear bearing types. pw.