Finally a blue foam Stockist/Seller in BRISBANE!!! ME! Modelers and CNC prototyping!

[Protoconcepts]

Hi All,
I work at a composites supplier on Brisbanes Northside.
I also operate a small in home CNC which is why I'm here...

After searching FOREVER for "Blue foam" i'm now a supplier! Hooray!!!
I have 400 density blue foam which is AMAZINGLY better then styrofoam, for strength AND surface finish, but its damn hard to get. But, I also have 700 density which is much harder, and barely compresses at all for ailerons and other moving control surfaces to remove flex, also any mounting point that may take some compression.

Now I have gone out of my way for a long time looking for a this stuff, and it took a lot of convincing for my boss to bring it in. So if you want it, please email me!

Best thing about it is that its cheap!
If anyone would be interested in trying some, or looking at a sample...
sheet thickness is from 25 mm to 100mm and 600x2500 wide.
However as yet I might need to get them cut to 1250 or even 2000 just to get em on the courier cheap (Just for now, later I'll sort something out.)

If anyone is interested please email me, or call me.
James Irvine
CG Composites Australia Pty Ltd
Unit 11 191 Hedley Ave
Hendra 4011
Qld Australia
Ph: 61 7 3868 2025
Mob: 0488 266 700
Fax: 61 7 3268 2244