not much help here is there?
let's try an easier one then.....
sorry, been busy and only just got back here. Turns out it'sa bad electrical connection. Either the board or cables. Local tech's had meconvinced it was parameters, I proved it wasn't. 1st power up after a day, allis good. If you need to turn off and back on again within a few hours, pgerrors on c & y appear.
got another small issue that I don't have a clue about.Control is seicos multi. Can't save graphics generated shape on programmingside. tried -9999 to clear memory, It shows 10.1 free. but I get a red textsaying "over memory"
anyone had this or know how to solve it?