Hitachi TS15 Turret reset procedure

Page 1 of 2 12 LastLast
Results 1 to 20 of 28

Thread: Hitachi TS15 Turret reset procedure

  1. #1
    Registered
    Join Date
    Apr 2013
    Location
    United States
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Hitachi TS15 Turret reset procedure

    Hi All,

    * I have 1998 Hitachi Seiki TS15 with seicos sigma 21 control.* I recently had the timing belt in the turret start to fray and the belting was pulled from within the middle of the belt wrapping around the pulleys causing it to not index correctly and causing a turret index time out alarm.* I was able to clear the belting and get it working again without removing the whole turret disc and was able to continue using it while I waited for a new belt to come until it happened again for the same reason.* I removed the "tool turret disc"* and get the old belt off and replace it with a new belt.* However, the timing is now off when I index the turret so it wont clamp correctly.* I still have it apart.*

    I cannot find the correct procedure to reset the timing of the turret in my manuals.* Online it seems different models of hitachi seikis use different 3 button combinations and procedures to reset this.* I have seen that I may need to change the 1815 parameter possibly and something else K00.3?

    Does any one know the correct procedure on this lathe?* Any help would be greatly appreciated.

    Thank you

    Similar Threads:
    Last edited by docdesigns; 08-27-2017 at 10:57 AM.


  2. #2
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Hitachi TS15 Turret reset procedure

    Hello docdesigns,

    I have the same problem with these lathe, i know how to changue the parameter K00.3, do you have exactly the bit that need must changed?

    The button combinations are Stop Spindle, Select button and feed hold at the same time.



  3. #3
    Member shas595's Avatar
    Join Date
    Dec 2009
    Location
    United States
    Posts
    539
    Downloads
    0
    Uploads
    0

    Default Re: Hitachi TS15 Turret reset procedure

    That is a keep relay - so you have to go to Keep Relay 00 and change bit 3 from a 0 to a 1. PM me if you need more help and I can send you a procedure on how to fix this

    John



  4. #4
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Hitachi TS15 Turret reset procedure

    Quote Originally Posted by shas595 View Post
    That is a keep relay - so you have to go to Keep Relay 00 and change bit 3 from a 0 to a 1. PM me if you need more help and I can send you a procedure on how to fix this

    John
    Can you send me the procedure please?

    k45h@live.com

    Thank you!



  5. #5
    Member shas595's Avatar
    Join Date
    Dec 2009
    Location
    United States
    Posts
    539
    Downloads
    0
    Uploads
    0

    Default Re: Hitachi TS15 Turret reset procedure

    Sent - take a look and let me know how it works out

    John



  6. #6
    *Registered User* LBI1989's Avatar
    Join Date
    Dec 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Hitachi TS15 Turret reset procedure

    Hi,

    I need this procedure too, can anyone send it to me?

    Thanks



  7. #7
    *Registered User* EvoLEngineering's Avatar
    Join Date
    Jan 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    I have the same issue. Can someone send me the procedure? Thanks



  8. #8

    Default Re: Hitachi TS15 Turret reset procedure

    john can you send me the reset procedure?



  9. #9
    Member shas595's Avatar
    Join Date
    Dec 2009
    Location
    United States
    Posts
    539
    Downloads
    0
    Uploads
    0

    Default Re: Hitachi TS15 Turret reset procedure

    Send me a PM with your email and I’ll send you you


    Sent from my iPhone using Tapatalk



  10. #10

    Default Re: Hitachi TS15 Turret reset procedure

    have you received my pm?



  11. #11

    Default Re: Hitachi TS15 Turret reset procedure

    if you can send me an email to arthugot@gmail.com



  12. #12
    Member shas595's Avatar
    Join Date
    Dec 2009
    Location
    United States
    Posts
    539
    Downloads
    0
    Uploads
    0

    Default Re: Hitachi TS15 Turret reset procedure

    Hello
    procedure sent! Take a look and let me know that it worked
    John



  13. #13

    Default Re: Hitachi TS15 Turret reset procedure

    john I cant change parameter 1815. how can i do that?



  14. #14
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default

    Hi can you send it to me as well mikkib79@hotmail.co.uk
    Cheers



  15. #15

    Default

    no mather what I do I can't change parameter 1015 from 2 to 4



  16. #16

    Default

    Figured out, at the Set Button I have enabled parameter write and all worked good. Thank you John, I owe you a beer !! Machine up and running !



  17. #17
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    526
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by shas595 View Post
    Hello
    procedure sent! Take a look and let me know that it worked
    John
    Hi can you send me the procedure as well please to mikkib79@hotmail.co.uk
    Cheers



  18. #18
    Member shas595's Avatar
    Join Date
    Dec 2009
    Location
    United States
    Posts
    539
    Downloads
    0
    Uploads
    0

    Default

    Glad it worked for you! That PWE setting is hidden - glad you found it and are back to making chips!
    John

    Quote Originally Posted by arthugot View Post
    Figured out, at the Set Button I have enabled parameter write and all worked good. Thank you John, I owe you a beer !! Machine up and running !




  19. #19
    Member shas595's Avatar
    Join Date
    Dec 2009
    Location
    United States
    Posts
    539
    Downloads
    0
    Uploads
    0

    Default Re: Hitachi TS15 Turret reset procedure

    Just sent it to you - let me know how it works out!
    John

    Quote Originally Posted by mbservice View Post
    Hi can you send me the procedure as well please to mikkib79@hotmail.co.uk
    Cheers




  20. #20
    greelyman's Avatar
    Join Date
    Nov 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Ht23j

    Hi John, It looks like you have a lot of knowledge of Hitachi-Seiki's. I have an HT23J. The tool unclamp/clamp piston hit the hydraulic tool release piston while the turret was indexing, & stopped the turret. I don’t know how to get it back to zero. Can you help me with the procedure to zero it?
    Its a Hitachi-Seiki HT23J with a Yasnak control.

    Thank you

    Mike



Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hitachi TS15 Turret reset procedure

Hitachi TS15 Turret reset procedure