- Please assist
-
Registered
Please assist
I have been trouble shooting a HT-30 with a Seicos A10l control. The alarm I am getting is a 1018 "Z communication Pulse Error". I am at the point where I think the encoder is bad on my Z axis motor. this is a $900 encoder so I want to be sure before I order it. does anybody have a clue if I am on the right track?
Similar Threads:
-
-
Member
Re: Please assist
Is the alarm immediate before standby? You could try swapping the encoder leads across the servo to confirm.But sounds like you are on the right track. Also - with machine not moving, swing around the Z-Axis cables just to make sure there isn't a disconnect in your wiring
John
-
Registered
Re: Please assist
the Alarm is after hydraulics are turned on and I try to move Z in handle. I am now getting another alarm saying I have a voltage surge. I think I may have more issues than I first anticipated. looks to me like the main power supply might be the issue. Thank you for your help.
-
Member
Re: Please assist
How did it turn out - curious to see what the issue was.
-
Registered
Re: Please assist
the spindle drive was bad. we ended up trading our machine in since a new drive is $14,000 and a rebuilt drive is $4,000. machine isn't worth the money we put into it.
- Please assist
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules